mario kart party

Mario Kart Party: Racing Flags

Here’s what you’ll need:Derby Mom 360: Mario Kart Checkered Flags
Hole Punch
String/Jute/Ribbon of your choice
Scissors
Tape
Print Derby Mom 360: Mario Kart Checkered Flags on Cardstock

This is a quick and simple way to make any party look more festive! This printable has two pages. The first page is just a traditional black and white checkered pennant. The second page has the golden mushroom that is also featured on the award ribbons. You could do a whole row of either flag or alternate between each. You could use only the first page for any party or even for the background of a photo shoot.

Derby Mom 360: Mario Kart Checkered FlagsI used two flags on the front door to set the mood for our guests. I put a string of eight just over the television to make the racing more festive.

HAVE FUN!

Please share your homemade creations on the Flickr Group. I can’t wait to see them.

Mario Kart Party: 12-Person Single Elimination Tournament with Consolation

I had 12 people RSVP to my party and half were men and half Derby Mom 360: Maro Kart Bracketwere women so we went with seeding in the order that they RSVP-ed and did a male and female side of the bracket. That is totally random and arbitrary. You could have time trials to seed. Or ask people their level of experience. Whatever works for you.

For me, I just went Player 1 – Player 12 in the order that they said they would be attending. Since our party was all couples it would make it so someone would only player their spouse if they made it to the Consolations or Finals. Seemed like a fun way to do it and kind of erased the fact that most of the men at the party were much better than women at this video game.

We did our tournament on Mario Kart Wii. Each game was in the “VS” mode and the Wii randomly picks 4 courses that you’ll run. Those 4 courses take about 10 mins total. At the end of the races, one will be the winner by points and move on. The other is knocked out. Then we moved onto the next game of the tourney. The entire event took about 2 ½ hours. We coupled it with an Italian themed potluck dinner party so guests drank, eat and chit chatted in between turns and heckling those who were playing.

Here is a printable bracket that you can use for a 12-person single elimination tournament with a consolation round.

Derby Mom 360: Mario Kart Tourney Brackets

Good luck with your home tournament! I hope it is tons of fun. I’d love to see how your party turned out so please share comments below and pictures in the Flickr Group.

Derby Mom 360: Mario Kart Award Ribbons

Mario Kart Party: Award Ribbons with Printables

Here’s what you’ll need:Derby Mom 360: Mario Kart Award Ribbons
Construction Paper: Blue, Red and Yellow (2 strips of 2.5”x12” each color)
Cardstock (3 strips of 2” x 11”)
Ribbon (1” x 24”)
Hot Glue Gun
Printable Centers (see below) or homemade inserts of your choosing

To begin, cut two pieces of construction paper that are 2.5” wide x the longest length. My paper was 12” but whatever you have is fine. I wanted pretty large awards. If you’d like yours to be smaller, cut the width of these two strips narrower. I cut out two strips of all three colors.

Derby Mom 360: Mario Kart Award RibbonsNext you’ll want to cut out some strips of cardstock. I liked the look of the brown more natural sheets but you could use anything. I cut these 2” wide. Again, just cut them the length of your paper. My paper was 11.5”. You’ll just need one strip for each ribbon, so three total for this project.

Then you’ll start crimping your construction paper, meaning that you’ll want to fan fold it back and forth. There’s no exact size here. I found that I liked the look of a little tighter fold but you can do whatever you’d like here. Once you start folding one color, you’ll try to keep the size of your folds the same size each time for both strips.

Derby Mom 360: Mario Kart Award RibbonsDerby Mom 360: Mario Kart Award RibbonsOnce you’ve fan folded it all, you’ll want to glue the two ends together on each side for you get a fully connected cylinder. You could use any glue or tape here but I find a glue gun easiest for the rest of the project so I used that.

The next bit is probably the trickiest portion of this award project. You’ll want to bring on edge of the cylinder all together and lay it flat. The other edge will fan out and become the outside of the ribbon. It took both hands at first to keep it held in that position. Then once you have it properly gathered, you’ll grab your glue gun and put a good blob of hot glue in the center. You’ll need to keep holding the starburst in place while the glue dries. I just held it and blew on it for a about two minutes. After my first award, I realized I could wedge heavier objects on a couple sides to keep it from moving while it dried. Whatever works, you just want the glue to be hard before you release it.

While that is drying, you can prep your inserts. I made mine kind of funny and full of inside jokes for my group of friends. I have a more generic one here that is more likely to meet your needs. Just cut these out and they will serve as your center inserts. I chose to print them on cardstock so the paper would be stiffer to hold up to the hot glue.

Derby Mom 360: Mario Kart Award Ribbons

Next you’ll want to hot glue the insert to the appropriately colored construction paper starburst. I did First (Grand Champion sounded more regal) in blue, Second in red and Third in Yellow. I flipped my starburst over and found the side without the glue glob to be more flat and easier to affix the center circle nice and flat. I hot glued in the center of the circle and then much more thinly near the perimeter so it would be on snuggly but not show any lumps of glue.

Derby Mom 360: Mario Kart Award RibbonsDerby Mom 360: Mario Kart Award RibbonsMaro-Kart-Awards-5Then the last part is to prep and affix the lower ribbon portion. I folded my cardstock at an angle to look like ribbon. Then I cut two strips of ribbon, slightly longer than each piece and glued them into place and let them hang over the end. Once that glue dried, I cut out a triangle on the bottom to give them a nice finished look. I used about 2 feet of white 1” wide ribbon but you could really use any scraps you have lying around.

Derby Mom 360: Mario Kart Award RibbonsLastly, I laid down a good portion of glue at the folded end and affixed the back of my starburst to it. I head it in place for a bit until the glue started to set. That’s it! You have one beautiful homemade ribbon. I made one first to get the hang of it and then assembly lined the rest of them doing each step at the same time.

I found some cute Mario Kart trinkets at Ross and affixed each award to the prize as a “trophy” for the tournament top finishers. I have a very competitive group of friend and I felt like the awards made it so there was more on the line. There are prizes and titles to be won or lost! Makes the stakes higher.

I’d love to see how yours turned out. Post to the Flickr Group to share your creations.

Derby Mom 360: Mario Kart Party

Mario Kart Tournament

Looking around the internet I couldn’t find much guidance as to how to throw a home Mario Kart Derby Mom 360: Mario Kart TournamentTournament so it seemed like a good topic to share here.

I hosted this event as an adult dinner party. We did a fully Italian themed potluck complete with dinner, drinks, Mario Kart Wii and a lot of heckling. You could easily substitute out the cocktails and have this party for kids instead. Also, you could skip the tournament play entirely and just use some of these fun elements as an accent to your next Mario themed birthday party.

Derby Mom 360: Mario Kart TournamentThis entry is linked to all the different parts which include tutorials, links and downloads on the following:
Award Ribbons
Single Elimination 12-person Tournament Brackets
Mario & Goomba Construction Paper Decorations
Checkered Pennant Racing Flag Decorations

Enjoy! Hope you have a great party!

P.S. I’d love to see how yours turned out. Post to the Flickr Group to share your creations.